TRAILER WIRING Connectors, Taillight Converters Molded inline connectors are an econo-mical means of connecting electrical systems. Wires are color coded for easy installation. Standard 18 gauge automotive wire, 60” long, polarized to insure proper connection. Molded case offers all-round weather protection. Universal design, at extension or cut for car and tailer ends. 12V, 20A. 6-WAY CONNECTOR BRACKETS For 6-way to 7-way or 4-way to 6-way connectors. Includes clamp (19-1060) to mount bracket (19-1064) to hitch cross tube (sold separately). 1 year warranty. 19-1060 118136 6/7-Way Bracket, Piece 1 19-1064 118138 6/7-Way Bracket, Piece 1 69-9519 12-413E 4-Way Male to Female Loop, 60” 69-9518 12-412E 4-Way Male to Female Loop, 24” 4-WAY 60” LOOP VEHICLE & TRAILER END 4-WAY VEHICLE & TRAILER END Four-way flat wiring adapter with vehicle and trailer ends. Ground wire runs full length of assembly. Taillight, stop and turn functions printed on wire. 7.5 amps max per circuit. Includes 4-wire taps. Conforms to SAE spec. J1128. 1 year warranty. 19-0944 118045 4-Way Flat, 60” 69-9894 118636 4-Way Flat, 24’ HEAVY-DUTY POWER MODULE Rated for up to 4.2A for turn/ stop circuits and 7.5A for the taillight circuit. Integrated resettable short circuit and overload protection from shorts and installation wiring mishaps. Works with LED or incandescent bulbs giving trailer lights full brightness. Designed not to send feedback thru the vehicle circuits. Interprets/decodes multiplex signal inputs. 1 year warranty. 17-0319 119190 Integrated Circuit Overload Protection 17-0316 119191 w/ Installation Kit TRAILER LIGHT POWER MODULE Rated for up to 4.2 amps for turn/stop circuits and 7.5 amps for the taillight circuit. Works with either LED/ incandescent bulbs. Will override the hazard lamps when the brake is activated. Can be used on a 2-wire or 3-wire system. 17-0315 119147 Trailer Light Protector Converts 3-wire to 2-wire with integrated 4-way flat connector and 60” of wire. Improved circuit board features greater load capacity. Protects against incorrect wiring and voltage drop. 1 year warranty. 17-0283 119178 Int. Circuit Protector 17-0396 119130 18” Blunt Lead, 60” on 4 Flat TAILLIGHT CONVERTERS 3 to 2 Taillight Converter from Pollak converts from 3-wire to 2-wire. Includes 12” leads on both sides. 69-9525 12-752 Taillight Converter TAILLIGHT CONVERTERS HEAVY-DUTY 3-2 SOLID STATE TAILLIGHT CONVERTER Universal converter application, 4-wire flat connection on molded unit. 60” long. Adhesive mount. 95-3296 12-751EV Standard 95-3295 12-750EV Heavy-Duty Does not tap into existing vehicle wiring. Fits most vehicles with clearance in taillight. Operated by the towing vehicle. 14-5264 BX8869 Wiring Kit, each 14-5230 BX88184 Bulb/Sockets, 10/pack Uses a system of diodes to wire the towed vehicle’s brake lights, taillights and running lights for towing. 17-0361 154 Deluxe Kit 17-0089 152 Economy Kit BULB & SOCKET WIRING KIT UNIVERSAL WIRING KIT Replacement diode block for wiring kits. Molded and sealed to keep moisture out. 14-5706 BX8863 9 Terminals, 4 Amp 14-5226 BX88159 Diode, 6A, 12 Pack HY-POWER™ DIODES DIODE BLOCKS Use to tie into the towed vehicle’s brake light, running light and turn signal wiring, and connect it to your motorhome. Diodes permit electrical current to flow in only one direction. 17-0371 790 One Hy-Power Diode 17-0370 792 Two Hy-Power Diodes 17-0372 793 Three Hy-Power Diodes 17-0373 794 Four Hy-Power Diodes 17-0374 790-25 25 Hy-Power Diodes (Bulk) 23-13
RkJQdWJsaXNoZXIy MjA3Mjg=